High Voltage Amplifier/ Piezo Driver AHVAPN1800V20MABN
$1,800.00
The AHVAPN1800V20MABN is an electronic module for amplifying an analog input voltage into a high voltage output. It comes with a high voltage DC-DC converter, which converts the 24V input voltage into two output voltages: -1900V and +1900V. The analog input voltage, VIN(t), can be from -10V to +10V, the corresponding output voltage, HVO(t), is from -1800V to +1800V. There are three LEDs indicating: 24V power supply is present and within an appropriate window: 23V to 25V, the high voltage power supply is outputting ±1900V outputs properly, and the control loop works properly, i.e. HVO(t)=180VIN(t).
MAIN FEATURES
Built-in High Voltage Power Supply
- Bi-directional Output: ±1800V
- High Current Capability: Up to 20mA
High Slew Rate: 2400V/µs@open load 540V/µs@250pF load
Bandwidth: 15kHz@ Load = 100pF 10kHz @ Load = 250pF 8kHz @ Load = 500pF 3kHz @ Load = 1nF
- Input Signal Voltage Range: ±10V
Compact Size: 9.15(L) ×9.05(W) ×2.4(H) inch 232.5(L) ×230(W) ×61(H) mm
APPLICATIONS
This series of high voltage amplifiers can be used for driving Piezo and other high voltage loads.
Available on backorder
1~4$1800.00 each
5~8$1780.00 each
9~12$1760.00 each
13~16$1740.00 each
17~20$1720.00 each
>=21$1700.00 each
Additional information
| Weight | 10 lbs |
|---|
